Are you looking for the best 110V MIG welder? We got you. Read further to learn more. MIG welders are among the most versatile welding tools on the market. Consumer-oriented MIG welders compensate for their lack of industrial strength with consistency, speed, and versatility.
Finding the best 110V MIG welder may appear difficult at first. However, if you follow our advice and look at our top picks in this category, you can discover that it isn’t as difficult as most homeowners imagine.
So we’ve compiled a list of the best 110V MIG welders.
Top 5 Best 110V MIG Welders
Our top 5 selected best 110V MIG welders are listed below.
- Lotos MIG 140 Aluminum Shielded Welder
- Hobart 500559 Handler
- Lincoln Electric K2185-1
- Super Deal PRO MIG 130
- Goplus MIG130
Best 110V MIG Welders Reviews
This post will go through the benefits of the best 110V MIG welders that will pay for themselves if purchased.
We’ll also go over the pros and cons of each welder so you can figure out which one is ideal for you.
Let’s get into the in-depth review of the best 110V MIG welders.
1. Lotos MIG 140 Aluminum Shielded Welders
Key Features:
- Dimensions: 22″x10″x16″
- Weight: 56 lbs
- Input voltage: 110V/120V
- Output of 140A
- Duty cycle: 30% At 80 amps
One of the best features of the Lotos MIG 140 welder is the semi-automatic feeding. You can still operate it as a typical MIG welder, but by releasing your finger grip, you can work on longer projects.
The aluminum wire feeder is a dependable and easy-to-use device. Lotos MIG 140 welder is capable of welding stainless steel from 24-gauge to 3/16-inch thick “thickening. The Lotos MIG 140 thrives at light-duty applications but falls short when working with heavy materials.
When operating at maximum power, the duty cycle is reduced by half to 15%. While this may be a problem for rookie welders, an expert welder should not be concerned about the extra downtime.
The prevention of thermal overload is a foregone conclusion. This Lotos MIG 140 welder might be the one for you if you’re seeking a versatile MIG welder. With 10 variable speed settings and 10 arc voltage options, the customization options are more than suitable for tasks around the house and light industrial applications.
Accessories include a MIG torch, gas pipe, argon regulator, clamp cable, contact tips, welding wire, and a welding helmet. A spool gun is not included in the package.
Pros
- The airflow capacity is adequate
- Extras accessories are included
- It has a high output for a 110V welder
- There are 10 different speeds to choose from
- 2T/4T Switch
Cons
- A spool gun is not available with it
2. Hobart 500559 Handler 110V MIG welder
Key Features:
- Dimensions: 19”x11″x13″
- Weight: 57 lbs
- Input voltage: 115V
- Output ranges: from 25 to 140 amps
- Duty cycle: 20% At 90 volts
Hobart is well-known for its high-quality industrial gear. As the company’s entry-level model, the Hobart 500559 welder is a very reliable MIG welder for home use, mild to medium-duty workloads, and those wishing to make a long-term investment.
The 500559 can weld mild steel up to 1/4 inch thick and 24-gauge steel. The machine can be plugged into any standard household outlet, making it perfect for use in home workshops. The 40 to 700 IPM wire feed speed range may also be appreciable.
To quickly complete a range of chores, you can choose from ten different speed levels. The Hobart 500559 Handler, with a 90A output, can also handle a 20 percent duty cycle. The output current is adjustable between 25 and 140 amps. This enables the 500559 to work with both very thin metal sheets and heavier materials but at a slower rate.
The 5-position voltage control knob on this machine makes it a versatile machine that can generate a consistent arc across a wide range of materials and gauges. Despite the fact that Hobart provides some necessary extras, the overall package may be too costly.
You can buy the Hobart 500559 as a stand-alone device if you already have everything you need except a welder and start welding steel, stainless steel, or aluminum right away.
Pros
- Versatile
- A higher-than average duty cycle
- Durable
- There are five output possibilities to choose from
- The 10 speed setting
Cons
- Little expensive
3. Lincoln Electric K2185-1
Key Features:
- Dimension: 18.3″ x 10.3″ x 16.8″
- Weight: 26 lbs
- Input voltage: 115 volts
- Output: 35 to 88 amps
- Duty cycle: 20% At 70 volts
The Lincoln Electric K2185-1 welder is one of the best 110v welders on the market. It doesn’t have a lot of power, with a maximum current of 88A, but it has a lot of welding consistency. Many competing welders in its price range can’t match its ability to produce better-looking welds and finishes.
You can choose from four different voltage settings. There’s also a detailed table on the back of the welder that shows you which setting is best for different metal gauges and thicknesses. The K2185-1, with a duty cycle of 20% at 70A, does an excellent job of supporting the operator in accelerating the welding process.
The Lincoln Electric K2185-1 welder lightweight 1’s design is another notable attribute, contributing greatly to its portability score. The welder boasts a complex cooling fan system that keeps the machine cool during most jobs, in addition to thermal overload prevention.
Although it isn’t the most versatile MIG welder available, it is one of the most durable and dependable. It’s also an excellent value when you consider that you’ll get a gas regulator, hose, wire spool, welding gun, and clamp.
If you want to deal with steel up to 1/8 inch thick, “The Lincoln Electric K2185-1 welder is a suitable choice for your home workshop because it is thick.
Pros
- All of the necessary equipment is included
- Medium to high-level output
- The duty cycle is above average at maximum output
- Consistent feeding
- Effective protection against overheating
Cons
- The control panel has a limited number of settings.
4. Super Deal PRO MIG 130
Key Features:
- Dimension: 22.2″ x 15.5″ x 12.5″
- Weight: 38 lbs
- Power source: 110V
- Output: 50-120A
- Duty cycle: 35% at 60A
If budget is your first priority while shopping for a MIG welder, the Super Deal MIG130 welder is a good option. It’s advertised as a light-duty home welder that’ll get the job done swiftly. It’s also lightweight and comfortable to use when precision is required.
The machine has four output levels and a standard 10-speed control knob to ensure you get just the right amount of wire at the right speed for the job.
The Super Deal MIG130 welder can perform in a variety of scenarios despite its less-than-sturdy construction. The machine does not overheat as much as you might think, and the PVC housing never becomes too hot to touch.
A wire spool, a bush, a chipping hammer, a torch with two spare tips, a ground cord, and a very fine safety mask are included as accessories with this welder. Given how economical the welder is and the fact that it can still create a stunning output, the extensive list of accessories is frosting on the cake at this point.
The most important thing to remember is to avoid heavy-duty tasks and materials thicker than 1/8 inch thick. While the Super Deal MIG130 welder is capable of handling a bigger workload and thicker materials, the process will most likely take too long to finish on time.
Pros
- All of the necessary accessories are included
- Affordable
- The interface and functioning are simple to use
- Lightweight
- The duty cycle is higher than typical at low and medium voltages
Cons
- It’s not as good with aluminum
5. Goplus MIG130 welder
Key Features:
- Dimension: 13.4″ x 7.3″ x 11″
- Weight: 35 pounds
- Input voltage: 110V/120V
- Output: 105A
- Duty cycle: 15% at 105A
The Goplus MIG130 welder is a compact flux-core welder. It’s made of steel and features a soft plastic grip. With a maximum output of 105A, the Goplus MIG130 is not a heavy-duty MIG welder. It is, nevertheless, packed with features and capable of tackling nearly any minor task you can throw at it.
It comes with built-in accessory storage and a high-end air vent for heat dissipation. The thermal overload protection shuts down the equipment when you work it beyond its capability.
The control panel allows you to select one of four current flow levels. You may also tune the welder to feed wire at one of ten different speeds. The full accessories set includes the following items: a welding gun, wire, mask, wire brush, ground cord, and metal tip.
When welding steel, this portable MIG welder excels, and it even outperforms when it comes to preventing oxidation. You can use it practically anywhere as long as you have access to a 20A 110V circuit.
Because of its performance and all of the associated accessories, the Goplus MIG130 welder is a good entry-level MIG welder with flux-core welding capabilities. The majority of homeowners will find it handy, particularly those who do not want to invest a lot of money on welding equipment for modest repairs.
Pros
- Good for sheet steel
- Four different amp settings to choose
- There are 10 different wire feed speeds setting to choose
- The body that lasts a long time
- The power cord is quite long
Cons
- It’s impossible to work with materials that are excessively thick
Buying Guide
This buying guide will lead you to the factors you should focus on when buying the best 110V MIG welder. Let’s start.
GWAW Vs FCAW Welding
Although MIG welding produces a strong weld, the results aren’t always appealing. Most MIG welds must be cleaned and polished to look presentable. Although MIG welding necessitates constant wire feeding, GWAW (gas metal arc welding) and FCAW (fused copper arc welding) are two other choices (flux-cored arc welding).
GWAW welding is a one-of-a-kind welding method. This method employs inert gas to create a barrier around the weld. The goal is to safeguard the environment from pollution.
In FCAW welding, a tubular wire with flux is used to create a shield around the arc. In FCAW welding, shielding gas can also be employed.
Each machine comes with its own set of benefits. Because of its portability and fast welding speeds, FCAW welders are popular. They are typically the fastest welders for house repair work.
Welding using GWAW is straightforward and may be done on very thin materials as thin as 26 gauge. GWAW welding, on the other hand, needs the carriage of a gas tank. This is not the best solution if you seek maximum portability and adaptability.
Understanding the Input Power
In most circumstances, a person with little or no experience with these instruments should inquire about the machine before purchasing it. As previously stated, there are many stick welder types, each of which is best for a specific type of welding, so narrowing down your search based on your unique needs will be easy.
Second, choose a budget – good models may be purchased for about $200, but those who require heavy-duty work may need to spend $400 to $500. Stick welders, on the other hand, require a substantial cost outlay.
After you’ve decided on the type and budget you want, you’ll want to broaden your search and exclude any models that don’t include any accessories. Some equipment comes with free accessories such as electrode holders, cables, work clamps, and power adapters. Do you require welding equipment? For additional information on which materials work best with your welder, [Read Our Complete Guide]
Duty Cycle
The duty cycle is a specification for equipment that is expressed as a percentage of minutes during which the tool should supply a given current. The mentioned percentage corresponds to a maximum ten-minute interval in most circumstances. For example, if the machine has a power of 150 amps and a 30% set cycle, you can only operate it for three minutes at a time before letting it rest for seven minutes.
Consider the stick welder as a human being: it exerts the “muscles” over time (during the cycle), so it must rest to avoid overheating. Allowing the machine to rest for the required length is critical when planning your task because the tension imposed on it may cause the mechanics to malfunction.
If you’re hiring a professional, either inquire about the duty cycle of the equipment or try to negotiate a contract based on results rather than pay per hour of work.
Overload Protection
If you’ve ever used a welder, you’ve probably noticed that after a period of continuous operation, the equipment may grow rather hot. The auto-shutdown option in a MIG welder is one of the most important functions, as it protects you, the machine, and the welding locations.
Practically all MIG welders now have heat overload protection as standard. The quality and reaction may be affected by the manufacturer’s engineering and/or proprietary technology. It’s impossible to compare two welders just on the basis of this characteristic.
Only one thing is certain: you should avoid purchasing welders without overload protection, especially if you can’t tell when it’s time to take a break on your own.
Best Place To Buy An Arc Welder Online
These machines are available for purchase from a variety of online sources, including eBay, industrial sites, and so on. Furthermore, there are always people that post bargains on tech sites that may or may not be relevant to your search. These machines, on the other hand, aren’t toys, food, or something to be taken lightly – buying one is always going to be an expensive investment, not to mention the possibility of receiving defective equipment.
As a result, Amazon is the safest place to buy this item online. In addition to being the most popular and reliable online company, this online market has a strict set of laws that apply to users on both ends: vendors and buyers. They also offer free shipping in some areas.
You can use Amazon’s return/refund policy, which is one of the best features. People transport their goods all over the world all the time, and even if your vendor is close by, an accident can happen at any time, resulting in a damaged delivery – this is where return policies come into play.
Conclusion
It’s not difficult to choose the best 110V MIG welder if you know what you’re looking for in terms of power and efficiency. Each of our top five choices, as well as the bulk of these welders, can be set up in about 10 minutes. But if you want our suggestion, we’d say the Lotos MIG 140 Aluminum Shielded Welder and the Hobart 500559 Handler are the best.
When the time comes to purchase your new MIG welder for home use, hopefully, this information will assist you.
With 8 years of experience a senior welding instructor and safety equipment researcher and writes articles, reviews and guidelines on helmets and other welding and safety gears at Welder Choice, and other written works have been published in various publications.