The Yeswelder MIG-205DS review welder may have popped up in your search for a quick and excellent multi-process welder. You might have also questioned whether the item’s low cost accurately reflects the welder’s capabilities. In this evaluation, we weigh the evidence and assist you in deciding if the cheap cost of this multi-process welder is justified.
Many small workplaces are put off by the cost of introducing a multi-welder. Alternatively, you can be searching for a cheap backup welder. Regardless, you could be forced to take into account those cheap, foreign welders that everyone sees on the market.
The sticker price of the Yeswelder MIG-205DS is tempting. Whatever the case, is it fantastic?
In fact, the 205DS is equipped with the ability to stick, flux core, and MIG weld. In addition, DC TIG welding is an option. This portable, lightweight device also comes with a number of other features, such as the ability to run on 110V or 220V.
The YesWelder 205DS resembles a versatile multi-welder and, on paper, offers a lot for less money than similarly equipped, more expensive machines. It seems incongruous because, as the saying goes, you get what you pay for.
To avoid having to go through the same process, we conducted some investigation to discover more about this unique made-in-China gadget. Think about the following.
Yeswelder MIG-205DS Review
Key Features:
- Mig gun, 10′
- 35-50 fast connectors on a 10′ Earth clamp and cable
- 10′ Cable and Electrode Holder with 35-50 Quick Connector
- 110V/220V Converter
- U.S. gas hose
- Contact tips 0.035″ and 0.030″
- Brush & Hammer
Pros and Cons of Yeswelder MIG-205DS
Pros
- Low cost
- either a 110V or a 220V power supply is used.
- Out of the box prepared to MIG, stick, and flux core weld
- the regulator’s gas-on button to configure it
- Use the wire feed button to help with tip configuration.
- MIG welding 2T and 4T
- 100% CO2 in a dedicated location
- lift DC TIG alternative
- Arc quality can be fine-tuned by changing the inductance value.
- Small and lightweight
- Moving around is made simple with the carry handle.
- a dust shield that shields the control panel
- Automatic adjustments are made to the weld settings, wire thickness, stock thickness, and set gas type.
- It is possible to fine-tune the welding presets.
Cons
- No consumables are provided.
- Numerous units are in mm rather than inches.
- When not welding, the fan’s persistent operation can be annoying.
- It only uses DC TIG and cannot TIG weld metal.
- The machine has no weld settings chart.
- TIG torch not supplied
- When using the TIG welding process, a foot pedal is not permitted.
- need a gas regulator of your own
- Some people are concerned about the lifetime of inverter technology.
- Case When used as a portable welder, metal is too thin to resist dents and dings.
Yeswelder MIG-205DS Buyers Guide
Reasons for multi-process welders include:
- provides instant labor reductions from a number of processes.
- saving space by integrating many pieces.
- less expensive than purchasing many single-purpose devices
For auto body professionals, small fabrication businesses, and do-it-yourself hobbyists, multi-process welding systems make a lot of sense.
With a single primary unit and a backup unit that yet cost less than a full complement of specialist units, one-man operations can save a lot of money.
Now that issue is resolved, let’s turn our attention to the specifics of the MIG-205DS.
TIG Welding
Although the unit is intended for DC TIG, the case does not contain a TIG torch. In light of this, if you need to DC TIG with this welder, you need to buy one when you buy the welder.
Similar to this, the YesWelder MIG-205DS only employs a lift TIG method. With a foot pedal, this welder cannot operate.
Nothing consumable
With the consumables that come in the case, Yeswelder kept things insufficient. You merely receive a few tips and no wire or stick electrodes (one 0.030 and one 0.035 to exact). Consumables are separate purchases that you need to make.
Fortunately, you may get welding wire and electrodes directly from the makers for a reasonable price.
No Aluminum Welding
You might assume that if you need to weld metal, you can use MIG welding as this equipment cannot AC-TIG. This equipment, however, is not spool gun ready. However, if you know what you’re doing, passing a solid aluminum wire through the wire feed framework is possible.
Simply said, if this will be your first time welding aluminum, do not purchase this welder. However, you can learn how to use the machine’s wire feed system to feed aluminum wire with a little trial and error. However, you must have patience and the ability to occasionally deal with a problem or two.
Your own regulator is required.
The gas regulator is another item that you must purchase alone. While a gas hose is provided, the regulator is not. We are assured that the makers’ own brand of the regulator, which can be found here, performs well.
Dinse Euro Connectors
The leads plug into the unit using the smaller “Euro” dense connectors. They work out beautifully, although they are a little shorter.
As a result, the YesWelder MIG-205DS cannot accommodate older leads with a connector that is a little bit longer.
Simply make sure to purchase the Euro, shorter DINse connection in case you need to add extensions or replace the torch or light in the future (dinse 35-50).
User Guide/Welding Instructions
When you purchase this product, you won’t learn anything much from the user manual. It is too brief, poorly written, and lacking in information for someone new to welding.
Additionally, the chart that is typically printed inside the wire drive door is not there. Even with the help of the settings that have been loaded into the device, this makes it more difficult to use.
To set up and use your new welder, you should plan on spending some time online. The good thing is that there are many videos available to help you because this welder is well-liked. You can download charts created by various users as well.
Additionally, many customers find that the settings for comparable Miller welders serve as a good starting point for your settings.
Metric Units
You can only enter stock thickness in millimeters while doing so. With this equipment, there is no mm-to-inch converter. So be prepared to perform the metric conversion on your own.
Inverter Technology
Due to the utilization of inverter technology, this machine may be made smaller and lighter. Additionally, it has a minimum welder with a 200A force yield and a 60% duty cycle. In fact, that is a very good characteristic.
Although inverter technology performs well, some welders claim that the truth will eventually come to light and show if this technology is lasting. Although the right reaction up to this point appears to be accurate, it is reasonable to assume that this technology is more modern when compared to some previous designs.
Cost
Given that this machine costs about half as much as many of its rivals, it is a worthwhile investment in any case. However, don’t forget to add the missing gas controller, consumables, and optional TIG light/accessories that you might need to buy separately.
Arc Quality
Most intriguing is the Arc on the Yeswelder MIG-205DS. Truth be stated, you can minimize the dispersal with a little practice. In fact, even seasoned welders praise the unit’s arc quality as a strong aspect.
This device also lets you adjust the inductance value to adjust the arc. This gives you the option to streamline the arc or make it a little harsher, depending on the circumstances around a particular weld.
Ground Clamp
Strong interlaced wires are used to connect the jaws to the brace or clamp. This is not a common discovery among expensive welders.
Wire Feeding Method
The wire feed system’s component pieces are all made of metal. (Some of the feed parts of many affordable class welders are made of plastic.) Yeswelder appears to have taken into account the value of the wire feed structure and added some quality to theirs.
MIG 2T and 4T
The 2T method is used by the majority of units, although it depends on what you want. However, you have the option to employ a 4T MIG technique with the YesWelder MIG-205DS.
For those who may not be aware, in 2T welding, you pull the trigger to start and release it to stop. To start your arc using the 4T method, squeeze the trigger. Then, release it to continue welding. When it’s time to quit, you pull and then release the trigger once more.
4T appears complicated on paper. However, that means you don’t have to press the trigger the entire time for long welds.
Lift TIG
Even seasoned welders are intrigued by the lift TIG to start on the MIG-205DS, another unexpected feature. Although it is quite smooth and doesn’t stick, it allows you to better welds. On spending units, this kind of execution is unusual.
Portable
The “power source” inside the machine, which is what is shipped, weighs only 22 lbs. The case also has a convey handle on top and is small enough to conceal during shipment. The YesWelder MIG-205DS makes moving your multi-welder about easy for those who carry the welder to work or use a welding cart or wagon.
Welding SMAW
This welder is ideal for those who frequently use stick welding in particular situations. There are no rods included, however, it does come with an electrode holder.
Power Source
You will undoubtedly find 110V outlets if you move around a lot. Don’t worry, this device can operate on 110V and, if available, 220V as well.
Or, on the other hand, you can use 110V in the interim if you plan to add 220V to your shop later. Extension cords or plug adapters are included, so you are not constrained.
Setup Buttons
Yeswelder offers some nice additions to make setting up easier. One operates the wire feed framework by itself and is the wire feed button. This enables you to handle the wire via the lead to the gun at a controlled speed while turning off your gas.
The gas can be handled in the same way. The gas is automatically turned on via a button. Again, this enables you to precisely control the flow rate by running gas through your system.
MIG-205DS vs MIG-250 Ace Comparison
If you are considering the MIG-205DS, you might have noticed that Yeswelder also has a variant available under the name MIG-250 Professional.
A rundown will suffice as the differences in value aren’t that great. If you need more power, think you might want to weld on aluminum, and know you’ll usually have access to a 220v outlet, the MIG-250 Star machine will serve you better for an extra $80.
Customers’ Opinions about The MIG-205DS
When welders utilize this unit, a few basic observations apply as normal. Such statements as “Yeswelder MIG-205DS is great value even though it costs $500. Class-driving duty cycle is high.
Welding experiences are typically described as “wonderful” and “easy to use.” Customers frequently exclaim, “I love this little device.”
The advice “welder settings for the auto set will be too hot, I would have a shot at dialing it down a touch from the start” is one that pops up frequently. Fortunately, you can modify the defaults on the MIG-205DS to accomplish this.
Another excellent piece of advice is to “consider buying the welding wire through Yeswelder concurrently because it is really valuable.” Consumables are not included in the container, however, Yeswelder makes it simple and affordable to add them to your order if you deal directly with them.
FAQs
Conclusion
Here we Conclude the whole Yeswelder MIG 205DS Review.
The Yeswelder MIG-205DS offers stick, flux core, MIG, and TIG welding capabilities for a low price. It operates on 110V or 220V, has a 60% duty cycle at 220A, and uses inverter technology to create a more portable, lightweight machine.
Additionally, the Yeswelder included a functional control panel that is covered with dust. Additionally, there are unique details like an inductance adjustment, a carry handle, and a setup specifically for using CO2. Thus, despite being a cheap welder, this equipment is loaded with numerous useful functions.
You receive tons of advantages, features, and a respectable performance for the price. This unit is a wonderful choice because of all these factors. This machine is reasonable for beginning welders or those on a tight budget and adds a lot of additional features to your small workplace. As an alternative, the MIG-205DS is a respectable piece of equipment to have if you require a cost-effective backup welder. For further details about the top affordable auto body welders
With 8 years of experience a senior welding instructor and safety equipment researcher and writes articles, reviews and guidelines on helmets and other welding and safety gears at Welder Choice, and other written works have been published in various publications.